Proyecto de Investigación: QUIMICA PREBIOTICA: UNA PLATAFORMA EXPERIMENTAL PARA LA EXPLORACION DE HABITABILIDAD EN LUNAS HELADAS DEL SISTEMA SOLAR
Cargando...
Colaboradores
Financiadores
ID
ESP2017-89053-C2-2-P
Autores
Publicaciones
Highly efficient melt polymerization of diaminomaleonitrile
(Elsevier BV, 2021-01-15) Mas, I.; Hortelano, C.; Ruiz Bermejo, Marta; De la Fuente, J. L.; Agencia Estatal de Investigación (AEI); 0000-0002-8059-1335; Unidad de Excelencia Científica María de Maeztu Centro de Astrobiología del Instituto Nacional de Técnica Aeroespacial y CSIC, MDM-2017-0737
HCN polymers are of great interest in research on the origin of life and, currently, in materials science because they have shown potential for the design of electrical devices, (photo)catalysts and biomedicine. Herein, calorimetric measurements have successfully described the bulk polymerization of HCN tetramer, diaminomaleonitrile (DAMN). Two series of nonisothermal experiments were carried out by differential scanning calorimetry (DSC), and low-heating rate (β) the thermograms (β ≤ 5 °C/min) indicated that the polymerization is initiated at temperatures lower than the DAMN melting point, ~180 °C; while higher heating rates results in a rapid polymerization reaction, which occurs entirely in the liquid phase. The DSC data were analysed using model-free linear iso-conversional methods to estimate kinetic parameters, such as activation energy, and a suitable kinetic model was proposed for these thermal polymerizations in the melt. A preliminary structural and morphological characterization by means of Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) was also completed. This study demonstrated the autocatalytic, highly efficient and straightforward character of this stimulated thermal polymerization of DAMN and, to the best of our knowledge, describes for the first time a systematic and extended kinetic analysis to gain mechanistic insights into this process. The latter was done through the help of simultaneous thermogravimetry (TG)-DSC and in situ mass spectrometry (MS) technique to investigate the gas products generated during these melt polymerizations. These analyses revealed that deamination and dehydrocyanation processes are two relevant reactions involved in DAMN polymerization mechanism.
A Comparative Study on HCN Polymers Synthesized by Polymerization of NH4CN or Diaminomaleonitrile in Aqueous Media: New Perspectives for Prebiotic Chemistry and Materials Science
(Chemistry Europe: European Chemical Societies Publishing, 2019-08-02) Ruiz Bermejo, Marta; De la Fuente, J. L.; Carretero González, J.; García Fernández, L.; Rosa Aguilar, M.; Agencia Estatal de Investigación (AEI); Unidad de Excelencia Científica María de Maeztu Centro de Astrobiología del Instituto Nacional de Técnica Aeroespacial y CSIC, MDM-2017-0737
HCN polymers are a group of complex and heterogeneous substances that are widely known in the fields of astrobiology and prebiotic chemistry. In addition, they have recently received considerable attention as potential functional material coatings. However, the real nature and pathways of formation of HCN polymers remain open questions. It is well established that the tuning of macromolecular structures determines the properties and practical applications of a polymeric material. Herein, different synthetic conditions were explored for the production of HCN polymers from NHCN or diaminomaleonitrile in aqueous media with different concentrations of the starting reactants and several reaction times. By using a systematic methodology, both series of polymers were shown to exhibit similar, but not identical, spectroscopic and thermal fingerprints, which resulted in a clear differentiation of their morphological and electrochemical properties. New macrostructures are proposed for HCN polymers, and promising insights are discussed for prebiotic chemistry and materials science on the basis of the experimental results.
A dual perspective on the microwave-assisted synthesis of HCN polymers towards the chemical evolution and design of functional materials
(Nature Research Journals, 2020-12-18) Hortal, Lucia; Pérez Fernández, Cristina; De la Fuente, J. L.; Valles González, M. P.; Mateo Martí, Eva; Ruiz Bermejo, Marta; Instituto Nacional de Técnica Aeroespacial (INTA); Agencia Estatal de Investigación (AEI); http://dx.doi.org/10.13039/501100011033; http://dx.doi.org/10.13039/501100010687; Unidad de Excelencia Científica María de Maeztu Centro de Astrobiología del Instituto Nacional de Técnica Aeroespacial y CSIC, MDM-2017-0737
In this paper, the first study on NH4CN polymerization induced by microwave radiation is described, where a singular kinetic behaviour, especially when this reaction is conducted in the absence of air, is found. As a result, a complex conjugated N-heterocyclic polymer system is obtained, whose properties are very different, and even improved according to morphological features, characterized by their X-ray diffraction patterns and scanning electron microscopy analysis, with respect to those produced under conventional thermal treatment. In addition, a wide variety of relevant bioorganics have been identified, such as amino acids, nucleobases, co-factors, etc., from the synthetized NH4CN polymers. These particular families of polymers are of high interest in the fields of astrobiology and prebiotic chemistry and, more recently, in the development of smart multifunctional materials. From an astrobiological perspective, microwave-driven syntheses may simulate hydrothermal environments, which are considered ideal niches for increasing organic molecular complexity, and eventually as scenarios for an origin of life. From an industrial point of view and for potential applications, a microwave irradiation process leads to a notable decrease in the reaction times, and tune the properties of these new series macromolecular systems. The characteristics found for these materials encourage the development of further systematic research on this alternative HCN polymerization.
Characterization of HCN-derived thermal polymer: Implications for chemical evolution
(Multidisciplinary Digital Publishing Institute (MDPI), 2020-08-11) Villafañe Barajas, S. A.; Ruiz Bermejo, Marta; Rayo Pizarroso, P.; Colín García, M.; Consejo Nacional de Ciencia y Tecnología (CONACYT); Colín García, M. https://orcid.org/0000-0002-9193-1761; Unidad de Excelencia Científica María de Maeztu Centro de Astrobiología del Instituto Nacional de Técnica Aeroespacial y CSIC, MDM-2017-0737
Hydrogen cyanide (HCN)-derived polymers have been recognized as sources of relevant organic molecules in prebiotic chemistry and material sciences. However, there are considerable gaps in the knowledge regarding the polymeric nature, the physicochemical properties, and the chemical pathways along polymer synthesis. HCN might have played an important role in prebiotic hydrothermal environments; however, only few experiments use cyanide species considering hydrothermal conditions. In this work, we synthesized an HCN-derived thermal polymer simulating an alkaline hydrothermal environment (i.e., HCN (l) 0.15 M, 50 h, 100 degrees C, pH approximately 10) and characterized its chemical structure, thermal behavior, and the hydrolysis effect. Elemental analysis and infrared spectroscopy suggest an important oxidation degree. The thermal behavior indicates that the polymer is more stable compared to other HCN-derived polymers. The mass spectrometric thermal analysis showed the gradual release of several volatile compounds along different thermal steps. The results suggest a complicate macrostructure formed by amide and hydroxyl groups, which are joined to the main reticular chain with conjugated bonds (C=O, N=O, -O-C=N). The hydrolysis treatment showed the pH conditions for the releasing of organics. The study of the synthesis of HCN-derived thermal polymers under feasible primitive hydrothermal conditions is relevant for considering hydrothermal vents as niches of chemical evolution on early Earth.
Chemorheology and Kinetics of High-Performance Polyurethane Binders Based on HMDI
(Wiley Online Library, 2021-01-21) Lucio, B.; De la Fuente, J. L.; Agencia Estatal de Investigación (AEI); Gobierno Vasco
Aliphatic diisocyanates, such as 1,6-hexamethylene diisocyanate (HMDI), are preferred curing agents for the formation of polyurethanes (PUs) in applications where resistance to abrasion or degradation by ultraviolet light takes precedence. Aside from the final properties, the curing agent plays a key role in the bulk manufacturing of such materials, and it mainly affects the polymerization kinetics and their rheology. The copolymerization of HMDI and a metallo-prepolymer derivative from hydroxyl-terminated polybutadiene (HTPB) is studied under isothermal conditions (50–80 °C). This study is carried out by means of an indirect method, using both rotational viscometry and dynamic rheometry. At the beginning of the process, the viscosity growth fit well to a first-order kinetic model. Afterward, the reactive system passes through gelation, from which only rheology is allowed for the investigation of the entire polymerization process. This transition is analyzed in depth together with predictions from percolation theory. The conversion degree is determined from rheological measurements, and then an autocatalytic kinetic model is applied to describe the overall process. Finally, an isoconversional method allows the evolution of activation energy to be studied. This analysis merits attention for the development of high-performance binders that are of great interest in aerospace propulsion technology.
