Publicación:
Pressure Optimized PowEred Respirator (PROPER): A miniaturized wearable cleanroom and biosafety system for aerially transmitted viral infections such as COVID-19

dc.contributor.authorNazarious, Miracle Israel
dc.contributor.authorMathanlal, Thasshwin
dc.contributor.authorZorzano, María Paz
dc.contributor.authorMartín Torres, Javier
dc.contributor.funderAgencia Estatal de Investigación (AEI)
dc.contributor.orcidNazarious, M. I. [0000-0002-7148-8803]
dc.contributor.orcidMathanlal, T. [0000-0003-2691-3855]
dc.contributor.orcidZorzano, M. P. [0000-0002-4492-9650]
dc.contributor.orcidMartín Torres, J. [0000-0001-6479-2236]
dc.contributor.otherUnidad de Excelencia Científica María de Maeztu Centro de Astrobiología del Instituto Nacional de Técnica Aeroespacial y CSIC, MDM-2017-0737
dc.date.accessioned2021-04-14T13:13:12Z
dc.date.available2021-04-14T13:13:12Z
dc.date.issued2020-10-06
dc.description.abstractThe supply of Personal Protective Equipment (PPE) in hospitals to keep the Health Care Professionals (HCP) safe taking care of patients may be limited, especially during the outbreak of a new disease. In particular, the face and body protective equipment is critical to prevent the wearer from exposure to pathogenic biological airborne particulates. This situation has been now observed worldwide during the onset of the COVID-19 pandemic. As concern over shortages of PPE at hospitals grows, we share with the public and makers’ community the Pressure Optimized PowEred Respirator (PROPER) equipment, made out of COTS components. It is functionally equivalent to a Powered Air Purifying Respirator (PAPR). PROPER, a hood-based system which uses open source and easily accessible components is low-cost, relatively passive in terms of energy consumption and mechanisms, and easy and fast to 3D print, build and assemble. We have adapted our experience on building clean room environments and qualifying the bioburden of space instruments to this solution, which is in essence a miniaturized, personal, wearable cleanroom. PROPER would be able to offer better protection than an N95 respirator mask, mainly because it is insensitive to seal fit and it shields the eyes as well. The PROPER SMS fabric is designed for single-use and not intended for reuse, as they may start to tear and fail but the rest of the parts can be disinfected and reused. We provide a set of guidelines to build a low-cost 3D printed solution for an effective PAPR system and describe the procedures to validate it to comply with the biosafety level 3 requirements. We have validated the prototype of PROPER unit for air flow, ISO class cleanliness level, oxygen and carbon-dioxide gas concentrations during exhalation, and present here these results for illustration. We demonstrate that the area inside the hood is more than 200 times cleaner than the external ambient without the operator and more than 175 times with the operator and in an aerosol exposed environment. We also include the procedure to clean and disinfect the equipment for reuse. PROPER may be a useful addition to provide protection to HCPs against the SARS-CoV-2 virus or other potential future viral diseases that are transmitted aerially.es
dc.description.peerreviewedPeer reviewes
dc.description.sponsorshipThe authors of the paper would like to acknowledge Andreas Nilsson from Department of Computer Science, Electrical and Space Engineering of the Luleå University of Technology (LTU), Sweden, for his support in the procurement of components. MPZ has been partially funded by the Spanish State Research Agency (AEI) Project No. MDM-2017-0737 Unidad de Excelencia ‘‘María de Maeztu”- Centro de Astrobiología (CSIC-INTA) and the Spanish Ministry of Science and Innovation project (ref. PID2019-104205 GB-C21).es
dc.identifier.citationHardwareX 8: e00144 (2020)es
dc.identifier.doi10.1016/j.ohx.2020.e00144
dc.identifier.funderhttp://dx.doi.org/10.13039/501100011033
dc.identifier.issn2468-0672
dc.identifier.otherhttps://www.sciencedirect.com/science/article/pii/S2468067220300535
dc.identifier.urihttp://hdl.handle.net/20.500.12666/383
dc.language.isoenges
dc.publisherElsevier BVes
dc.relationinfo:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020/PID2019-104205GB-C21
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.rights.accessRightsinfo:eu-repo/semantics/openAccess
dc.rights.licenseUnder a Creative Commons license
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectDo-It-Yourselfes
dc.subjectPersonal Protective Equipmentes
dc.subjectPAPRBSL-3es
dc.subjectOverpressurees
dc.subjectCleanroom-aerosol-respiration-mask-biosafetyes
dc.subjectCovid 19es
dc.titlePressure Optimized PowEred Respirator (PROPER): A miniaturized wearable cleanroom and biosafety system for aerially transmitted viral infections such as COVID-19es
dc.typeinfo:eu-repo/semantics/articlees
dc.type.coarhttp://purl.org/coar/resource_type/c_6501
dc.type.hasVersioninfo:eu-repo/semantics/publishedVersion
dspace.entity.typePublication

Archivos

Bloque original

Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
Pressure optimized powEred respirator (proper)- A miniaturized wearable cleanroom and biosafety system for aerially transmitted viral infections such as COVID 19.pdf
Tamaño:
5.31 MB
Formato:
Adobe Portable Document Format
Descripción:

Bloque de licencias

Mostrando 1 - 1 de 1
No hay miniatura disponible
Nombre:
license.txt
Tamaño:
4.82 KB
Formato:
Item-specific license agreed upon to submission
Descripción:

Colecciones