Examinando por Autor "Hortelano, C."

Mostrando 1 - 4 de 4

Restringido
Air effect on both polymerization kinetics and thermal degradation properties of novel HCN polymers based on diaminomaleonitrile
(Elsevier, 2022-12) Hortelano, C.; Ruiz Bermejo, Marta; De la Fuente, J. L.; Instituto Nacional de Técnica Aeroespacial (INTA); Ministerio de Ciencia, Innovación y Universidades (MICIN); Agencia Estatal de Investigación (AEI); Centro de Astrobiología del Instituto Nacional de Técnica Aeroespacial y CSIC, MDM-2017-0737
The impact of air on the bulk polymerization kinetics of diaminomaleonitrile (DAMN), tetramer of HCN, and thermal degradation properties of this resulting conjugated C=N polymeric system is investigated under different temperature regimes and environments. This study shows the effect of exposure to air and oxygen, time, temperature, and evolved gases during DAMN polymerization reactions, which can be suitably monitored by differential scanning calorimetry (DSC) through both dynamic and isothermal measurements. Thus, low heating rates and isothermal scans at 150-170 °C allow us to describe the solid-state polymerization (SSP) of DAMN, and those experiments at 190, 195 and 200 °C and higher heating runs define its melt polymerization (MP) behaviour. Both processes are highly efficient, possibly due to the self-acceleration nature of their kinetics, which is consistent with a three-step Šesták-Berggren (SB) model. The oxygen effect was analysed to determine their tolerance to this variable and confirm the nonradical nature of the mechanism under study. In addition, a detailed thermal characterization by simultaneous DSC/thermogravimetry coupled to mass spectrometry (TG-MS) of these singular polymeric systems obtained under air atmosphere has been completed, and the improvement of the thermal stability of those samples prepared by an SSP at lower temperature was confirmed. The present work offers lower-cost and simpler synthetic methods to obtain this novel class of promising multifunctional polymeric materials through highly efficient and very fast processes.
Restringido
Highly efficient melt polymerization of diaminomaleonitrile
(Elsevier BV, 2021-01-15) Mas, I.; Hortelano, C.; Ruiz Bermejo, Marta; De la Fuente, J. L.; Agencia Estatal de Investigación (AEI); 0000-0002-8059-1335; Unidad de Excelencia Científica María de Maeztu Centro de Astrobiología del Instituto Nacional de Técnica Aeroespacial y CSIC, MDM-2017-0737
HCN polymers are of great interest in research on the origin of life and, currently, in materials science because they have shown potential for the design of electrical devices, (photo)catalysts and biomedicine. Herein, calorimetric measurements have successfully described the bulk polymerization of HCN tetramer, diaminomaleonitrile (DAMN). Two series of nonisothermal experiments were carried out by differential scanning calorimetry (DSC), and low-heating rate (β) the thermograms (β ≤ 5 °C/min) indicated that the polymerization is initiated at temperatures lower than the DAMN melting point, ~180 °C; while higher heating rates results in a rapid polymerization reaction, which occurs entirely in the liquid phase. The DSC data were analysed using model-free linear iso-conversional methods to estimate kinetic parameters, such as activation energy, and a suitable kinetic model was proposed for these thermal polymerizations in the melt. A preliminary structural and morphological characterization by means of Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) was also completed. This study demonstrated the autocatalytic, highly efficient and straightforward character of this stimulated thermal polymerization of DAMN and, to the best of our knowledge, describes for the first time a systematic and extended kinetic analysis to gain mechanistic insights into this process. The latter was done through the help of simultaneous thermogravimetry (TG)-DSC and in situ mass spectrometry (MS) technique to investigate the gas products generated during these melt polymerizations. These analyses revealed that deamination and dehydrocyanation processes are two relevant reactions involved in DAMN polymerization mechanism.
Acceso Abierto
Kinetic Study of the Effective Thermal Polymerization of a Prebiotic Monomer: Aminomalononitrile
(Multidisciplinary Digital Publishing Institute, 2023-01-17) Hortelano, C.; Ruiz Bermejo, Marta; De la Fuente, J. L.; Agencia Estatal de Investigación (AEI); Ministerio de Ciencia e Innovación (MICINN)
Restringido
Solid-state polymerization of diaminomaleonitrile: Toward a new generation of conjugated functional materials
(Elsevier BV, 2021-05-03) Hortelano, C.; Ruiz Bermejo, Marta; De la Fuente, J. L.; Unidad de Excelencia Científica María de Maeztu Centro de Astrobiología del Instituto Nacional de Técnica Aeroespacial y CSIC, MDM-2017-0737
The solid-state polymerization (SSP) of organic molecules to form two-dimensional (2D) materials remains a challenge, especially when these reactions are performed in one pot using a single reagent. As will be shown, the SSP of the HCN tetramer diaminomaleonitrile (DAMN) may be an excellent example of these reactions. Dynamic experiments by differential scanning calorimetry (DSC) allow the analysis of the thermally initiated bulk polymerization of DAMN. Under nonisothermal measurements at low heating rates, a multiple-step polymerization reaction takes place. The SSP of DAMN is highly efficient, possibly due to the autocatalytic nature of its kinetics, which are consistent with the two-parameter Šesták-Berggren (SB) model and describe the three stages found in its complicated mechanism, confirmed also from an analysis of the variation in the apparent activation energy with the conversion degree. Relevant mechanistic aspects, such as the dehydrocyanation and deamination processes during SSP, are extracted by thermogravimetry-mass spectrometry (TG-MS). Moreover, some structural and morphological properties of these materials are characterized by Fourier-transform infrared (FTIR) spectroscopy and microscopy. All this information allows us to propose hypothetical pathways for the production of a complex conjugated system, predominantly constituted by a 2D macrostructure based on imidazole rings. This work opens up new possibilities for the synthesis of functional poly(heterocycle) systems, expanding our view of a plausible prebiotic chemical reaction space and providing the foundation for systematic studies of the structure-property relationships of novel HCN-derived polymers, which are currently of great interest in the fields of materials and surface science.